Difference between revisions of "PXI Registers"
Jump to navigation
Jump to search
(move protocol stuff to PXI Services since it is a FIRM construct) |
(clear up notes on sync cc profi200) |
||
Line 66: | Line 66: | ||
| 0-7 | | 0-7 | ||
| R | | R | ||
− | | Data received from remote | + | | Data received from remote bits 8-15 (unrelated to SEND/RECV FIFOs) |
|- | |- | ||
| 8-15 | | 8-15 | ||
| R/W | | R/W | ||
− | | Data sent to remote | + | | Data sent to remote bits 0-7 |
|- | |- | ||
| 23 | | 23 |
Revision as of 21:33, 2 July 2016
Registers
Old3DS | Name | Address | Width | Used by |
---|---|---|---|---|
Yes | PXI_SYNC9 | 0x10008000 | 4 | |
Yes | PXI_CNT9 | 0x10008004 | 4 | |
Yes | PXI_SEND9 | 0x10008008 | 4 | |
Yes | PXI_RECV9 | 0x1000800C | 4 | |
Yes | PXI_SYNC11 | 0x10163000 | 4 | |
Yes | PXI_CNT11 | 0x10163004 | 4 | |
Yes | PXI_SEND11 | 0x10163008 | 4 | |
Yes | PXI_RECV11 | 0x1016300C | 4 |
The PXI registers are similar to those on DS.
PXI_SYNC
Bit | RW | Description |
---|---|---|
0-7 | R | Data received from remote bits 8-15 (unrelated to SEND/RECV FIFOs) |
8-15 | R/W | Data sent to remote bits 0-7 |
23 | ? | ? |
29 | W? | Trigger PXI_SYNC11 IRQ (if enabled) |
30 | W? | Trigger PXI_SYNC9 IRQ (if enabled) |
31 | RW | PXI_SYNC IRQ enable (for local processor) |
This can also be accessed as 4 u8 registers.
PXI_CNT
Bit | RW | Description |
---|---|---|
0 | R | Send Fifo Empty Status (0=Not Empty, 1=Empty) |
1 | R | Send Fifo Full Status (0=Not Full, 1=Full) |
2 | R/W | Send Fifo Empty IRQ (0=Disable, 1=Enable) |
3 | W | Send Fifo Clear (0=Nothing, 1=Flush Send Fifo) |
8 | R | Receive Fifo Empty (0=Not Empty, 1=Empty) |
9 | R | Receive Fifo Full (0=Not Full, 1=Full) |
10 | R/W | Receive Fifo Not Empty IRQ (0=Disable, 1=Enable) |
14 | R/W | Error, Read Empty/Send Full (0=No Error, 1=Error/Acknowledge) |
15 | R/W | Enable Send/Receive Fifo (0=Disable, 1=Enable) |