Difference between revisions of "MVD Services"
m (missed an edit) |
|||
| Line 81: | Line 81: | ||
Initialization procedures: | Initialization procedures: | ||
* MJPEG: Use command [[MVDSTD:Initialize]] with bufsize=1, then command 0x00180000. | * MJPEG: Use command [[MVDSTD:Initialize]] with bufsize=1, then command 0x00180000. | ||
| − | * H.264: If needed, use [[MVDSTD:CalculateWorkBufSize]]. Then use [[MVDSTD:Initialize]]. Then use commands 0x00050100, 0x00180000, and 0x001B0040 | + | * H.264: If needed, use [[MVDSTD:CalculateWorkBufSize]]. Then use [[MVDSTD:Initialize]]. Then use commands 0x00050100, 0x00180000, and 0x001B0040. |
Shutdown procedures: | Shutdown procedures: | ||
Revision as of 22:29, 16 April 2016
This is for using the MVD hardware video decoder(unknown whether MVD can do more than decoding) + hardware color-format converter. The New_3DS Internet Browser uses mvd:STD for video decoding + YUV2RGB for decoded MJPEG frames.
See here for the supported hardware decoder video codecs.
A maximum of 4 sessions can be opened at a time, for all of these services combined.
MVD Service "mvd:STD"
| Command Header | Available since system version | Description |
|---|---|---|
| 0x00010082 | Initialize | |
| 0x00020000 | Shutdown | |
| 0x00030300 | CalculateWorkBufSize | |
| 0x00050100 | (u8 unk0, u8 unk1, u8 unk2, u8 unk3) SKATER uses value 0 for all of these params. | |
| 0x00070000 | ||
| 0x00080142 | DecodeFrame | |
| 0x00090042 | (u8 unkval, val0, kprocess handle) This writes some state beginning at cmdreply[2]. unkval is normally 0, when preparing to shutdown MVD unkval is 1. | |
| 0x000A0000 | ||
| 0x00180000 | ||
| 0x00190000 | ||
| 0x001A0000 | Used when doing color-format conversion. | |
| 0x001B0040 | (u8 unknown) SKATER uses value 1 for this. | |
| 0x001C0000 | ||
| 0x001D0042 | GetConfig | |
| 0x001E0044 | SetConfig |
This one uses the I/O mapped @ 0x10207000.
This service is used by the New_3DS Internet Browser.
By default MVD does(?) various post-processing with the output image, this is controlled by the configuration. This post-processing isn't done at all in certain cases. By default MVD will align the output frame width to 512, by writing zero-value pixels.
Initialization procedures:
- MJPEG: Use command MVDSTD:Initialize with bufsize=1, then command 0x00180000.
- H.264: If needed, use MVDSTD:CalculateWorkBufSize. Then use MVDSTD:Initialize. Then use commands 0x00050100, 0x00180000, and 0x001B0040.
Shutdown procedures:
- MJPEG: just use command 0x00190000, then MVDSTD:Shutdown.
- H.264: Use command 0x00090042 in a loop, waiting for it to return a retval that isn't 0x00017002. Then use commands 0x001C0000, 0x00190000, and 0x00070000. Then use MVDSTD:Shutdown.
MVD Service "l2b:u"
This one uses the I/O mapped @ 0x10130000.
MVD Service "l2b2:u"
This uses the same command-handler as "l2b:u".
MVD Service "y2r2:u"
This one uses the I/O mapped @ 0x10102000.
MVD Result-codes
| Result-code | Internal MVD status-code | Description |
|---|---|---|
| 0xD961710F | Invalid configuration, mainly when setting the config. |
Supported H.264 Levels and Profiles
| Level | Baseline | Main | High | High 10 (High10, High10p, Hi10p or 10-bit H.264) | High 4:2:2 (High422p or High422) | High 4:4:4 Predictive (Hi444PP) |
|---|---|---|---|---|---|---|
| 1 | Yes | Yes | Yes | Yes | Untested | Untested |
| 1b | Yes | Yes | Yes | Yes | Untested | Untested |
| 1.1 | Yes | Yes | Yes | Yes | Untested | Untested |
| 1.2 | Yes | Yes | Yes | Yes | Untested | Untested |
| 1.3 | Yes | Yes | Yes | Yes | Untested | Untested |
| 2 | Yes | Yes | Yes | Yes | Untested | Untested |
| 2.1 | Yes | Yes | Yes | Yes | Untested | Untested |
| 2.2 | Yes | Yes | Yes | Yes | Untested | Untested |
| 3 | Yes | Yes | Yes | Yes | Untested | Untested |
| 3.1 | Yes | Yes | Yes | Yes | Untested | Untested |
| 3.2 | Yes | Yes | Yes | Yes | Untested | Untested |
| 4 | No (untested) | No (untested) | No (untested) | No (untested) | No (untested) | No (untested) |
| 4.1 | No (untested) | No (untested) | No (untested) | No (untested) | No (untested) | No (untested) |
| 4.2 | No (untested) | No (untested) | No (untested) | No (untested) | No (untested) | No (untested) |
| 5 | No (untested) | No (untested) | No (untested) | No (untested) | No (untested) | No (untested) |
| 5.1 | No (untested) | No (untested) | No (untested) | No (untested) | No (untested) | No (untested) |
| 5.2 | No (untested) | No (untested) | No (untested) | No (untested) | No (untested) | No (untested) |
created using the New 3DS Internet Browser, New 3DS Internet Browser Specs and the following test pages:
Baseline Profile Test
Main Profile Test
High Profile Test
High10 Profile Test