SSL Services

SSL service "ssl:C"

Command Header	Available since system-version	Available from service-sessions	Description
0x00010002			(<value-0x20 kernel PID header>) Initialize
0x000200C2			CreateContext
0x00030000			CreateRootCertChain
0x00040040			DestroyRootCertChain
0x00050082		Main-only	AddTrustedRootCA
0x00060080		Main-only	RootCertChainAddDefaultCert
0x00070080		Main-only	(u32 RootCertChain_contexthandle, u32 inval)
0x00080000			This writes an output u32 to cmdreply[2](created context handle).
0x00090040			(u32 handle for a context) This is used for destroying a context created by command 0x00080000.
0x000A0082			(u32 contexthandle, u32 size, ((Size<<4) | 10), inbufptr) Writes an output u32 to cmdreply[2]. This uses a context created by command 0x00080000.
0x000B0080			(u32 contexthandle, u8 inval2) Writes an output u32 to cmdreply[2]. This uses a context created by command 0x00080000.
0x000C0080			(u32 contexthandle, u32 inval) This uses a context created by command 0x00080000.
0x000D0084			(u32 size0, u32 size1, ((Size0<<4) | 10), inbufptr0, ((Size1<<4) | 10), inbufptr1) Writes an output u32 to cmdreply[2](created context handle). This is the same type of context created by command 0x000E0040.
0x000E0040			(u8 inval) Writes an output u32 to cmdreply[2](created context handle).
0x000F0040			(u32 handle for a context) This is used for destroying a context created by command 0x000E0040.
0x00100000			?
0x00110042			GenerateRandomData
0x00120042			InitializeConnectionSession
0x00130040			(u32 contexthandle) Presumably used to start the actual TLS connection(not tested).
0x00140040			(u32 inval) Writes two u32s to cmdreply[2] and cmdreply[3].
0x00150082		Context-only	Read
0x00160082			(u32 inval, u32 size, ((Size<<4) | 12), outbufptr) Writes an output u32 to cmdreply[2].
0x00170082			Write
0x00180080			ContextSetRootCertChain
0x00190080		Context-only	(u32 contexthandle, u32 handle) This writes the specified handle into the context state, this handle is the type of context from command 0x000E0040.
0x001A0080			(u32 contexthandle, u32 inval)
0x001B0080			(u32 contexthandle, u32 inval)
0x001C00C4			(u32 inval, u32 size0, u32 size1, ((Size0<<4) | 12), outbufptr0, ((Size1<<4) | 12), outbufptr1)
0x001D0040			(u32 inval) Writes an output u32 to cmdreply[2].
0x001E0040			DestroyContext
0x001F0082		Context-only	ContextInitSharedmem
0x00200082		Context-only	(contexthandle, u32 size, ((Size<<4) | 10), inbufptr) Inbuf seems to be a cert?

Going by strings in the SSL sysmodule it appears the sysmodule uses RSA BSAFE(like certain other 3DS software), this is also likely where the "ssl:C" name comes from(RSA BSAFE "SSL-C").

Similar to HTTPC, each SSL context is used with a dedicated service session which gets opened after creating that context. Following creating the context + opening the service session, SSLC:InitializeConnectionSession is used from that service session for that context. Afterwards, all commands which require a handle for this context are done with this dedicated service session.

Internally there's a separate object vtable used with the above SSLC commands, for the main session(where SSLC:InitializeConnectionSession wasn't used), and context sessions where SSLC:InitializeConnectionSession was used. Error 0xD960BBF4 will be returned if a command was used with the wrong session type.

Like some other commands, 0x001F0082 and 0x00200082 are not used by HTTP-sysmodule.

Error codes

Error code	Description
0xd8a0b836	The specified RootCertChain handle was not found in the linked-list.