Difference between revisions of "CSND Registers"

From 3dbrew
Jump to navigation Jump to search
m (moved CSND to CSND Registers)
 
(2 intermediate revisions by 2 users not shown)
Line 1: Line 1:
 
=0x1EC03000=
 
=0x1EC03000=
 
+
?
{| class="wikitable" border="1"
 
!  NAME
 
!  PHYSICAL ADDRESS
 
!  WIDTH
 
!  DESCRIPTION
 
|-
 
| REG_DSP_FIFO
 
| 0x1ED03000
 
| 2
 
|
 
|-
 
| REG_DSP_??
 
| 0x1ED03004
 
| 2
 
| ???
 
|-
 
| REG_DSP_FIFO_CNT
 
| 0x1ED03008
 
| 2
 
|
 
|-
 
| REG_DSP_??
 
| 0x1ED03010
 
| 2
 
| ???
 
|-
 
| REG_DSP_STATUS
 
| 0x1ED0300C
 
| 2
 
|
 
|-
 
| REG_DSP_??
 
| 0x1ED03014
 
| 2
 
| ???
 
|-
 
| REG_DSP_??
 
| 0x1ED03018
 
| 2
 
| ???
 
|-
 
| REG_DSP_??
 
| 0x1ED0301C
 
| 2
 
| ???
 
|-
 
| REG_DSP_PORT<0-2>
 
| 0x1ED03020
 
| 3*8=0x18
 
|
 
|}
 
 
 
=== REG_DSP_STATUS ===
 
bit1,8: FIFO WRITE ERRORS?
 
 
 
bit6: FIFO_READ_READY
 
 
 
bit7: FIFO_WRITE_READY
 
 
 
bit9: ???
 
 
 
bit10-12: PORT<0-2>_RECV_READY
 
 
 
bit13-15: PORT<0-2>_SEND_READY
 
 
 
  
 
=0x1EC03400=
 
=0x1EC03400=
Line 119: Line 54:
 
| CSND module writes value zero here immediately after it writes to chanslotreg+0x18.
 
| CSND module writes value zero here immediately after it writes to chanslotreg+0x18.
 
|}
 
|}
 +
 +
=0x1EC03800=
 +
 +
There are two capture unit slot located at 0x1EC03800. Each slot has 0x10 bytes.

Latest revision as of 03:32, 21 April 2019

0x1EC03000[edit]

?

0x1EC03400[edit]

The channel registers are based at 0x1EC03400(process virtual address). There's 0x20-bytes total for each channel slot, thus the base-address for a channel's slot is determined with: 0x1EC03400 + (channel_index*0x20). The below offsets are relative to these channel register slots.

Relative offset Size Description
0x0 2 REG_CSNDCHANX_CNT. For Type0 Cmd 0xE, CSND module basically writes this value here: u16 (cmdword[2] & 0xFFFF).
0x2 2 For Type0 Cmd 0xE, CSND module writes this value here: 0 - (cmdword[2]>>16).
0x4 2 For Type0 Cmd 0xE, CSND module writes value 0 here.
0x6 2 For Type0 Cmd 0xE, CSND module writes value 0 here.
0x8 2 For Type0 Cmd 0xE, CSND module writes this value here: (u16)cmdword[4].
0xA 2 For Type0 Cmd 0xE, CSND module writes this value here: cmdword[4]>>16.
0xC 4 This is the audio data physical address, for the main channel.
0x10 4 This is the audio data total byte-size. The CSND module masks the size loaded from the Type0 command-data with value 0x7FFFFFF, which is then used when writing these registers.
0x14 4 This is the audio data physical address, for the second channel. When this is not 0x0 stereo audio is used, otherwise mono audio is used.
0x18 4 When CSND module handles type0 Cmd 0xE with encoding!=IMA-ADPCM, CSND module sets this to zero. This register can be initialized via CSND module type0 Cmd 0xB.
0x1C 4 CSND module writes value zero here immediately after it writes to chanslotreg+0x18.

0x1EC03800[edit]

There are two capture unit slot located at 0x1EC03800. Each slot has 0x10 bytes.