Difference between revisions of "CONFIG9 Registers"
Jump to navigation
Jump to search
| Line 43: | Line 43: | ||
* Selecting CTRCARD1 will activate the register space at [[CTRCARD|0x10004000]]. | * Selecting CTRCARD1 will activate the register space at [[CTRCARD|0x10004000]]. | ||
* Selecting CTRCARD2 will activate the register space at [[CTRCARD|0x10005000]]. | * Selecting CTRCARD2 will activate the register space at [[CTRCARD|0x10005000]]. | ||
| + | |||
| + | == 0x10010000 == | ||
| + | NATIVE_FIRM writes value 1 here when a FIRM launch begins. | ||
== REG_UNITINFO == | == REG_UNITINFO == | ||
This 8-bit register is value zero for retail, non-zero for dev/debug units. | This 8-bit register is value zero for retail, non-zero for dev/debug units. | ||
Revision as of 20:55, 14 April 2013
Registers
| NAME | PHYSICAL ADDRESS | WIDTH |
|---|---|---|
| ? | 0x10000004 | 4 |
| REG_CARDCONF | 0x1000000C | 2 |
| ? | 0x10000010 | 1 |
| ? | 0x10010000 | 4 |
| REG_UNITINFO | 0x10010010 | 1 |
REG_CARDCONF
| Bit | Description |
|---|---|
| 1-0 | Gamecard active controller select (0=NTRCARD, 1=?, 2=CTRCARD1, 3=CTRCARD2) |
| 8 | ? |
Depending on the gamecard controller that has been selected, one of the following gamecard registers will become active:
- Selecting NTRCARD will activate the register space at 0x10164000.
- Selecting CTRCARD1 will activate the register space at 0x10004000.
- Selecting CTRCARD2 will activate the register space at 0x10005000.
0x10010000
NATIVE_FIRM writes value 1 here when a FIRM launch begins.
REG_UNITINFO
This 8-bit register is value zero for retail, non-zero for dev/debug units.